High precision circular plane system for angular measurement
thesisposted on 23.05.2021, 15:03 authored by Zhaomin Yuan
The purpose of this project is to increase the measurement accuracy of the rotation angle and measurement speed. There is one rotatable circular plane with many holes in it, the initial location of this circular plane is stored in a CCD camera and is regarded as a stationary circular plane. When the rotatable circular plane is rotated, the intensity of the light across the holes of two circular planes is changed. This intensity will represent the position of the rotatable circular plane, so the position of that plane can be measured by calculating the intensities of light access between the two planes. In this project, several methods are proposed to increase the accuracy of measurement. To prevent a non- concentricity problem between two circular planes, only one circular plane is used in this system. To reduce the dfficulties in the fabrication process, holes will be used instead of using traditional slits. To increase the reading and calculation speed, an FPGA will be used in this system. For improving sampling accuracy, a Kalman filter is used. Overall, this system can reach an accuracy of 2:2176* 10-5 degree with all angles.