Helal_Mohamed.pdf (3.68 MB)

Robotic tooling calibration based on linear and nonlinear formulations.

Download (3.68 MB)
thesis
posted on 22.05.2021, 12:21 by Mohamed Helal
Industrial robot calibration packages, such as ABB CalibWare, are developed only for robot calibration. As a result, the robotic tooling systems designed and fabricated by the user are often calibrated in an ad-hoc fashion. In this thesis, a systematic way for robotic tooling calibration is presented in order to overcome this problem. The idea is to include the tooling system as an extended body in the robot kinematic model, from which two error models are established. The first error model is associated with the robot, while the second error model is associated with the tooling. Once the robot is fully calibrated, the first error will be reduced to the required accuracy. Thus, the method is focused on the second error model. For the tool error calibration, two formulations were used. The first is a linear formulation based on conventional calibration as well as self-calibration methods while the second is a nonlinear formulation. The conventional linear formulation was extensively investigated and implemented while the self-calibration was proven to be inadequate for the tooling calibration. Moreover, the nonlinear formulation was demonstrated to be very effective and accurate through experimental result. The end-effector position estimation as well as the tool pose estimation were obtained using a 3D vision system as an off-line error measurement technique.

History

Language

eng

Degree

Master of Applied Science

Program

Aerospace Engineering

Granting Institution

Ryerson University

LAC Thesis Type

Thesis